Segmental Body Composition in Fitness Facilities: Personalizing Training with the Charder U310
Two clients can weigh the same and have the same body fat percentage, yet carry their lean mass very differently. Should they follow the exact same program? Here is how segmental body composition helps trainers personalize, and where its limits are.

On this page
- Why body weight alone falls short
- What segmental body composition analysis measures
- What the research says
- Using segmental data to personalize training
- What the 2026 ACSM position stand adds
- A five-step assessment workflow for small and mid-size gyms
- Example: tracking a client over 12 weeks
- Measure under the same conditions every time
- Why the Charder U310 fits a fitness facility
- What segmental analysis can and cannot show
- The business case for your facility
Fitness facilities · Segmental analysis
Two clients can weigh the same and have the same body fat percentage, yet carry their lean mass very differently. Should they follow the exact same program? Here is how segmental body composition helps trainers personalize, and where its limits are.
- Body weight, BMI and total body fat do not tell the whole story: segmental analysis estimates how lean and fat mass are distributed across five body regions.
- Results are estimates. They complement, and never replace, a physical assessment of strength, movement quality and performance.
- A baseline assessment, periodic reassessment and standardized conditions let a facility offer professional, data-driven follow-up.
For gyms and personal training studios, one of the main challenges is designing programs that respond to each client’s characteristics and goals. For years, progress tracking has focused on body weight, body mass index (BMI) or total body fat percentage. Those numbers matter, but they leave out where the change is happening.
Knowing how lean mass and fat are distributed across different regions adds a useful layer to the assessment. The Charder U310 body composition analyzer, together with the Charder ProScan app, brings segmental analysis into the everyday evaluation workflow of a fitness facility.
Why body weight alone falls short
Picture two members. Both weigh 165 lb and both have an estimated body fat of 22%. Their overall results look identical, yet one may carry more estimated lean mass in the lower limbs while the other shows a more even distribution across arms, legs and trunk. Neither is necessarily fitter, but the difference gives the trainer more to work with.
Total weight also hides what happens during a program. A client can keep practically the same weight while losing estimated fat mass and gaining lean mass. Real progress tracking is not only about how much someone weighs, but about how their body composition changes alongside their physical performance.
What segmental body composition analysis measures
Segmental analysis estimates body components in five regions: right arm, left arm, trunk, right leg and left leg. Bioelectrical impedance analysis (BIA) uses the electrical properties of tissues to estimate body components through validated prediction equations; a segmental analyzer reports those estimates region by region.
The U310 uses an eight-point tactile electrode system. Through Charder ProScan it reports:
- Estimated skeletal muscle mass
- Segmental lean mass and segmental fat mass
- Total body fat percentage
- Estimated visceral fat level
- Total body water
- Estimated basal metabolic rate
- Measurement history for each client
One important nuance: segmental lean mass is not the same as the mass of a specific muscle. It includes other fat-free components and is influenced by how body water is distributed.
What the research says
A 2020 study in Clinical Nutrition compared segmental BIA estimates with dual-energy X-ray absorptiometry (DXA). The authors found promising agreement for several lean tissue estimates, but also meaningful differences between methods, particularly for fat mass.2
In practice, segmental BIA provides useful information as long as its results are read as estimates, not as exact anatomical measurements. For a trainer, the value comes from combining body composition data with the client’s physical assessment.
Using segmental data to personalize training
Everything starts with a baseline: body composition, training history, personal goals and a few performance tests. The program is built from that information and adjusted progressively.
Case 1: a client who wants to build muscle
At baseline, the U310 records whole-body and segmental estimates while the trainer assesses strength, experience and exercise technique. Over the following weeks, body composition is compared with training loads, completed repetitions and technique. If performance improves while body composition estimates stay stable, the program has not failed: neuromuscular adaptations can increase strength before muscle mass changes noticeably.
Case 2: differences between limbs
Suppose a client shows an estimated lean mass difference between the legs. That finding is a prompt to look more closely at squat mechanics, unilateral exercises and other functional tests. If strength or performance differences are confirmed, the program can include adapted unilateral work. The decision rests on the combined assessment, not on the impedance difference alone. The U310 does not diagnose functional asymmetries; it adds one more indicator to guide follow-up.
Case 3: a client focused on fat loss
During a fat-loss program, body weight can be a poor indicator. Tracking total fat mass and its estimated distribution shows changes the scale misses, such as a clear drop in estimated body fat with only a moderate change in weight. The goal is not to chase one number, but to check that the overall pattern fits the program, nutrition and the client’s health.
What the 2026 ACSM position stand adds
In 2026 the American College of Sports Medicine published an updated position stand on resistance training prescription, synthesizing 137 systematic reviews with more than 30,000 participants.1 Resistance training improved strength, hypertrophy, power and several components of physical function, and some programming variables influenced specific outcomes:
| Goal | What the evidence suggests |
|---|---|
| Maximal strength | Training with relatively heavy loads may offer an advantage |
| Hypertrophy | Higher weekly training volume may favor greater adaptations |
| Power | Moderate loads lifted with fast concentric movements |
| Adherence | Programs should fit individual preferences, abilities and goals |
Table 1. Programming variables highlighted by the 2026 ACSM position stand.
The evidence does not support designing programs solely around the muscle mass estimated by a scale. Body composition belongs alongside functional assessment, training experience and each client’s individual response.3
A five-step assessment workflow for small and mid-size gyms
You do not need a full laboratory to offer structured progress tracking. A simple protocol works:
- Baseline assessment. Record goals, relevant history and a U310 body composition measurement under standardized conditions.
- Functional assessment. Add tests suited to the client’s level: strength, mobility, balance or muscular endurance.
- Personalized programming. Define frequency, volume, intensity, exercises and progression. Segmental results add context on which regions deserve a closer look.
- Periodic reassessment. Repeat body composition and performance testing, for example every four to eight weeks depending on the program. This is an operational suggestion, not a universal rule. ProScan stores results so measurements can be compared over time.
- Results conversation. Walk the client through the changes, separating estimated body composition from objective performance gains. It builds realistic goals and trust.
Example: tracking a client over 12 weeks
| Indicator | Baseline | Week 12 |
|---|---|---|
| Body weight | 167.6 lb | 169.3 lb |
| Estimated body fat | 24.0% | 22.5% |
| Estimated skeletal muscle mass | 64.8 lb | 66.6 lb |
| Strength in a standardized test | 88 lb | 105 lb |
Table 2. Illustrative example with fictitious values. It is not a clinical study and does not demonstrate the accuracy or effectiveness of the U310.
Here weight rose slightly, but estimated fat and muscle moved in opposite directions and strength improved. That is a far better conversation than “you gained 1.7 pounds.” The trainer should still account for measurement variability and confirm both assessments were done under comparable conditions.
Measure under the same conditions every time
Bioimpedance is sensitive to changes in body fluid content and distribution. Recent exercise, meals, hydration and time of day can all shift results, so comparing a pre-workout measurement with one taken right after an intense session can lead to the wrong conclusion.4
- Measure at a similar time of day.
- Avoid measuring immediately after exercise.
- Keep meals and hydration comparable before each test.
- Use the same device and procedure.
- Note anything that could affect results.
- Interpret sustained trends, not small isolated fluctuations.
A change in estimated lean mass does not automatically mean real muscle growth. Standardization is what makes comparisons meaningful.5
Why the Charder U310 fits a fitness facility
The U310 is a portable analyzer that combines a platform with foot electrodes and a separate hand-grip unit.6 It uses eight contact points, and the manufacturer specifies a full scan in about 25 seconds. Results are sent wirelessly to the Charder ProScan app on compatible mobile devices, where they can be saved and compared over time.
For facilities without a dedicated assessment room, its compact format makes it easy to build a simple loop: baseline assessment, training program, follow-up and reassessment.
What segmental analysis can and cannot show
It can: estimate how lean and fat mass are distributed across regions, add information to the physical assessment, make successive measurements easy to compare, and help trainers explain body composition changes.
The best strategy is to integrate results with physical testing, individual goals and professional follow-up. For an objective strength measure, pair it with a Charder MG4800 hand dynamometer.
The business case for your facility
Differentiation. A gym that offers periodic assessments delivers a different experience from one that only checks weight, and segmental analysis fits naturally into personal training and coaching packages.
Clearer progress communication. Measurements explain changes the scale does not show and open conversations about habits, activity and goals.
Follow-up services. Facilities can package a baseline assessment, personal training and periodic check-ins, as long as the service answers a real client need.
A more professional operation. Recording results and using consistent protocols helps organize trainers’ work. Technology alone does not guarantee better outcomes; the value depends on staff training and on the quality of the decisions made with the data.
Progress is not always reflected in the number on the scale. Understanding how the body changes, and what each client achieves along the way, matters just as much.
Bring segmental analysis to your facility
Run a gym, personal training studio or wellness center? Free U.S. shipping and technical support from an authorized Charder distributor.
See the U310Request a quote- Currier BS, et al. American College of Sports Medicine Position Stand: Resistance Training Prescription for Muscle Function, Hypertrophy, and Physical Performance in Healthy Adults: An Overview of Reviews. Medicine & Science in Sports & Exercise, 2026. doi:10.1249/MSS.0000000000003897.
- Moore ML, et al. Segmental body composition evaluation by bioelectrical impedance analysis and dual-energy X-ray absorptiometry: quantifying agreement between methods. Clinical Nutrition, 2020. PMID: 31874783.
- Does varying resistance exercises promote superior muscle hypertrophy and strength gains? A systematic review. 2022. PMID: 35438660.
- Protocol standardization may improve precision error of InBody 720 body composition analysis. 2023. PMID: 37142404.
- Potter, et al. Real-world assessment of multi-frequency bioelectrical impedance analysis for measuring body composition in healthy physically active populations. 2025. PMID: 40957934.
- Charder Electronic Co., Ltd. U310 Body Composition Analyzer: specifications, segmental analysis and ProScan.
Technical note: the scientific content cited describes general evidence on resistance training and bioimpedance and should not be read as independent clinical validation of the U310. Body composition results are estimates and do not replace functional or medical evaluation when indicated.
Continue reading
All articles
Body CompositionCore Muscle Estimation by Bioimpedance: What the Evidence SaysDeep trunk muscles are traditionally measured with CT or MRI. Here is how Charder estimates them by bioimpedance, what data the method was built on, and how to read the results with clinical judgment.Technical article for healthcare professionals · 8 min read
Body CompositionGLP-1 Medications and Body Composition: Is Your Patient Losing Fat or Muscle?The scale shows how much weight a patient on semaglutide or tirzepatide is losing. It cannot show what that weight is made of.For patients and clinicians · 5 min read
Body CompositionMA601 vs. MA801 vs. U310: Which Charder Body Composition Analyzer Fits Your Practice?Three Charder analyzers, three very different ways of practicing. Here is how to tell which one fits your clinic, your patients and your workflow.For healthcare professionals · 4 min read